November 17, 2004
Above right shows a model of the Energetech device, while the bottom picture shows the large steel structure of the device being unloaded at Australia's Port Kembla for deployment in early 2005.
Photo: Energetech
|
|
November 17, 2004 Above right shows a model of the Energetech device, while the bottom picture shows the large steel structure of the device being unloaded at Australia's Port Kembla for deployment in early 2005. Photo: Energetech |
The Energetech system can be deployed as a single device, or strung together in a series, similar in concept to wind energy's "wind farms."
While more entrenched renewable energy technologies like wind power have
settled on a particular design for success -- large towers with horizontal-axis
wind turbines consisting of three blades -- quixotic wave and ocean energy
entrepreneurs are still exploring the seemingly infinite possibility of designs.
Eventually, certain designs will prove most effective and become the industry
standard. The Energetech deployment will be another step along that path.
Energetech has worked collaboratively with JP Kenny to design a moored ocean
energy structure made of structural steel. The basic structure weighs in at 485
tons, with dimensions of 40m by 35m by 18m.
The structure had spent the previous two weeks being shipped from Batam in
Indonesia, where it had been fabricated. The device was lifted off the transport
ship and into the waters of Port Kembla Harbor before being towed to the No. 6
Jetty. It will spend the next few months being fitted out with the new
Energetech turbine and hi-tech components prior to final installation off the
eastern breakwater of Port Kembla Harbour early next year.
In brief, the Energetech approach employs a parabolic wall to focus wave energy
onto an Oscillating Water Column (OWC) chamber. The rising and falling motion of
the waves causes an oscillatory water motion within the chamber, which in turn
forces a high-speed airflow past a unique controllable turbine. The turbine then
drives an induction generator to produce electrical power. System components are
computer controlled to optimize energy conversion in a range of conditions and
to automatically protect system components and ensure safety.
The Energetech system can be deployed as a single device, or strung together in
a series, similar in concept to wind energy's "wind farms."
The plant will be connected to the local power grid by an 11 kV cable. The
energy will be purchased by local power utility, Integral Energy, and sold to
residents in the local community. After commissioning, the device should supply
useful power to up to 500 homes and serve as a valuable test facility for
further technology development.
Construction is currently underway. Most of the system components will be
manufactured and partially assembled off-site. These will then be transported to
the site and installed. The scheduled completion date of the Port Kembla Wave
Energy Plant is February 2005.
If all goes well at Port Kembla, Energetech's device is likely to be deployed
off the Eastern Seaboard of the United States as well.
In August of this year, Energetech received $1 million in planning and
development funds from the public renewable energy funds of three New England
States (Rhode Island, Massachusetts and Connecticut) for a three-year deployment
of their device. The proposed 500 kW ocean wave-demonstration facility will be
located at Point Judith Harbor in Rhode Island as part of a multi-state effort
with Connecticut, Massachusetts and Rhode Island.
Please Note: RenewableEnergyAccess.com and Arizonaenergy.org do not endorse the sites behind these links. We offer them for your additional research. Following these links will open a new browser window.
Copyright © 1999 - 2004 - RenewableEnergyAccess.com
Please visit www.RenewableEnergyAccess.com for great coverage on energy today!!